FlexROM 102: Difference between revisions
(Created page with "FlexROM main rom for Tandy Model 102 <gallery> FlexROM_102-04.png FlexROM_102-05.png FlexROM_102-07.png FlexROM_102-02.png FlexROM_102-01.png </gallery> [https://oshpark.com...") |
|||
| (18 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
=EEPROM adapter for Tandy Model 102 system rom= | |||
With REX main rom support. | |||
Use this version also for late-model 100's that don't have the non-standard main rom pinout. (If you have a Model 100, and the main rm is NOT a LH535618, then use this instead of FlexROM_100) | |||
Use this version also for NEC PC-8201/PC8201A | |||
<gallery> | <gallery> | ||
| Line 7: | Line 12: | ||
FlexROM_102-02.png | FlexROM_102-02.png | ||
FlexROM_102-01.png | FlexROM_102-01.png | ||
FlexROM_102-08.jpg | |||
FlexROM_102-09.jpg | |||
FlexROM_102-10.jpg | |||
FlexROM_102-11.jpg | |||
FlexROM_102-12.jpg | |||
FlexROM_102-13.jpg | |||
FlexROM_102-14.jpg | |||
FlexROM_102-15.jpg | |||
FlexROM_102-16.jpg | |||
</gallery> | |||
== Updated Version == | |||
Now programmable without SOIC28 test clip. | |||
<gallery> | |||
FlexROM_102_1.jpg | |||
FlexROM_102_2.jpg | |||
</gallery> | </gallery> | ||
PCB: https://oshpark.com/shared_projects/UWjAMPF8 | |||
BOM: https://www.digikey.com/short/zv51fz | |||
You will also need a dip-28 0.6" socket to install on the mainboard https://www.digikey.com/short/zdb570 | |||
KiCAD schematic and pcb sources: https://github.com/bkw777/aDIPters | |||
Directions all the same as [[FlexROM_100]], except in addition you have to desolder the system rom from the mainboard and install a DIP28-0.6" socket in it's place. | |||
I HIGHLY suggest using ChipQuick or FastChip desoldring alloy to desolder the original rom chip to avoid damaging the mainboard. https://www.amazon.com/dp/B015RV4NBS | |||
Latest revision as of 03:25, 4 December 2020
EEPROM adapter for Tandy Model 102 system rom
With REX main rom support.
Use this version also for late-model 100's that don't have the non-standard main rom pinout. (If you have a Model 100, and the main rm is NOT a LH535618, then use this instead of FlexROM_100)
Use this version also for NEC PC-8201/PC8201A
Updated Version
Now programmable without SOIC28 test clip.
PCB: https://oshpark.com/shared_projects/UWjAMPF8
BOM: https://www.digikey.com/short/zv51fz
You will also need a dip-28 0.6" socket to install on the mainboard https://www.digikey.com/short/zdb570
KiCAD schematic and pcb sources: https://github.com/bkw777/aDIPters
Directions all the same as FlexROM_100, except in addition you have to desolder the system rom from the mainboard and install a DIP28-0.6" socket in it's place.
I HIGHLY suggest using ChipQuick or FastChip desoldring alloy to desolder the original rom chip to avoid damaging the mainboard. https://www.amazon.com/dp/B015RV4NBS