Model T Parallel Cable: Difference between revisions

Latest revision as of 18:46, 3 May 2022

Very simple:
Just place the colored wire on the pin #1 position on both connectors.

Remove the nuts from the db25 plug on the motherboard cable, discard the metal bracket, re-install the nuts on the db25 plug.

This cable is correct for several models of computer:

TRS-80 Model 100

TANDY Model 102, 200, 600

NEC PC-8201, PC-8201A, PC-8300, PC-8401, PC-8500

Olivetti M10

Kyotronic KC-85

@@ Line 6: / Line 6: @@
 ===Parts===
-'''futurlec''' is one of the very few places that has all the necessary parts in one shop, the centronics connector includes a strain relief, and lets you buy just the few feet of cable you need.
+*[https://www.futurlec.com/ConnIDC.shtml#:~:text=IDCCENTRONICSML IDC Male Centronics Connector] (scroll down to "Part Code: '''IDCCENTRONICSML'''")
-*[https://www.futurlec.com/ConnIDC.shtml#:~:text=IDCCENTRONICSML IDC Male Centronics Connector] (scroll to bottom, get the MALE Centronics)
 *[https://www.futurlec.com/Connectors/IDCC26pr.shtml 26P Female IDC Connector]
 *[https://www.futurlec.com/Cable.shtml#:~:text=GRCABLE26 26P flat cable] (get 2 meters of "26 Core")