FlexROM 102: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 22: | Line 22: | ||
FlexROM_102-16.jpg | FlexROM_102-16.jpg | ||
</gallery> | </gallery> | ||
== Updated Version == | == Updated Version == | ||
| Line 39: | Line 31: | ||
</gallery> | </gallery> | ||
PCB: https://oshpark.com/shared_projects/ | PCB: https://oshpark.com/shared_projects/UWjAMPF8 | ||
BOM: https://www.digikey.com/short/zdhft4 | BOM: https://www.digikey.com/short/zdhft4 | ||
KiCAD schematic and pcb sources: [https://github.com/bkw777/aDIPters github] | |||
Directions all the same as [[FlexROM_100]], except in addition you have to desolder the system rom from the mainboard and install a DIP28-0.6" socket in it's place. | |||
I HIGHLY suggest using ChipQuick or FastChip desoldring alloy to desolder the original rom chip to avoid damaging the mainboard. | |||
Revision as of 10:05, 3 November 2020
EEPROM adapter for Tandy Model 102 system rom
With REX main rom support.
Use this version also for late-model 100's that don't have the non-standard main rom pinout. (If you have a Model 100, and the main rm is NOT a LH535618, then use this instead of FlexROM_100)
Use this version also for NEC PC-8201/PC8201A
Updated Version
Now programmable without SOIC28 test clip.
PCB: https://oshpark.com/shared_projects/UWjAMPF8
BOM: https://www.digikey.com/short/zdhft4
KiCAD schematic and pcb sources: github
Directions all the same as FlexROM_100, except in addition you have to desolder the system rom from the mainboard and install a DIP28-0.6" socket in it's place.
I HIGHLY suggest using ChipQuick or FastChip desoldring alloy to desolder the original rom chip to avoid damaging the mainboard.