Model 100: Difference between revisions
| Line 25: | Line 25: | ||
Ideal, all-in-one cables: | Ideal, all-in-one cables: | ||
*[https://www.tripplite.com/null-modem-serial-db9-serial-cable-db9-db25-female-male-6-ft~P456006/ Tripp-Lite P456-006] | *[https://www.tripplite.com/null-modem-serial-db9-serial-cable-db9-db25-female-male-6-ft~P456006/ Tripp-Lite P456-006] | ||
*[https://www.cablesondemand.com/category/CSNULL/product/CS-DSNL4259MF/URvars/Items/Library/InfoManage/CS-DSNL4259MF.htm Amphenol CS-DSNL4259MF-005] | *[https://www.cablesondemand.com/category/CSNULL/product/CS-DSNL4259MF/URvars/Items/Library/InfoManage/CS-DSNL4259MF.htm Amphenol CS-DSNL4259MF-005] | ||
*[https://www.cablewholesale.com/products/serial-modem-cable/hp-plotter-cables/product-10d1-13306.php CableWholesale 10D1-13306] | *[https://www.cablewholesale.com/products/serial-modem-cable/hp-plotter-cables/product-10d1-13306.php CableWholesale 10D1-13306] | ||
| Line 38: | Line 37: | ||
*[https://www.cablewholesale.com/products/serial-modem-cable/null-modem-cables/product-10d1-21303.php CableWholesale 10D1-2103] | *[https://www.cablewholesale.com/products/serial-modem-cable/null-modem-cables/product-10d1-21303.php CableWholesale 10D1-2103] | ||
:Same as Monoprice 479 | :Same as Monoprice 479 | ||
Suspect, awaiting verification: | |||
*[https://www.cdw.com/shop/products/C2G-null-modem-cable-6-ft-white/1153481.aspx C2G 03019] | |||
===RAM Expansion=== | ===RAM Expansion=== | ||
Revision as of 01:23, 26 October 2017
Intro
Manuals
RAM
Serial cable
The ideal cable to go from a PC to a Model 100, 102, 200, or 600, is "9F/25M serial null-modem full-handshake".
That's an uncommon configuration to find pre-molded in a single cable, but one way to find them is to search for "HP Plotter Cable" or "Serial Printer Cable".
The serial port on a Model 100 is wired DTE, the same as a com port on a PC, but with a female connector, unlike any pc.
This is a backwards configuration from everything else today. There is some suggestion that maybe this is actually the original standard, and IBM came along later and changed it by putting male connectors on their PCs, but in any event, DTE ports being male has been the universal standard now for decades.
- Any modem or printer or digital scale or any other kind of peripheral with a serial connection will be wired DCE with a female connector, usually 25 pin.
- Any serial port card or usb serial adapter for a PC will be wired DTE with a male connector, usually 9 pin.
That means that usually you always need some kind of adapter between a PC and a M100.
The easiest way to connect with parts you are most likely to already have lying around, is to use a 9F/25M Modem Cable combined with a 9M/F Null-Modem Adapter.
Ideal, all-in-one cables:
- Tripp-Lite P456-006
- Amphenol CS-DSNL4259MF-005
- CableWholesale 10D1-13306
- StarTech SCNM925FM
- Epson CEPS-003BLK
Slightly less ideal cables. All-in-one, but not full-handshaking:
- Shorts RTS/CTS to self-satisfy on both ends. (but curiously, actually passes DTR/DSR correctly)
- Works fine for TPDD client/server connection, and almost everything else, since there isn't even any way to *set* hardware flow control in either BASIC or TELCOM anyway.
- But the hardware in the M100 *can* actually do rts/cts, if you manipulate the UART registers yourself from a machine language program. The only software I know of that does this is HTERM. So this cable is NOT suitable for HTERM.
- Same as Monoprice 479
Suspect, awaiting verification:
RAM Expansion
ROM Adapters
Pinouts
REX
FigTronix
Molex_Chip_Carrier