Model T Parallel Cable: Difference between revisions

Revision as of 05:52, 26 October 2021

Very simple:
Just place the colored wire on the pin #1 position on both connectors.

Remove the nuts from the db25 plug on the motherboard cable, discard the metal bracket, re-install the nuts on the db25 plug.

This cable is correct for several models of computer:

TRS-80 Model 100

TANDY Model 102, 200, 600

NEC PC-8201, PC-8201A, PC-8300, PC-8401, PC-8500

Olivetti M10

Kyotronic KC-85

@@ Line 10: / Line 10: @@
 *[https://www.amazon.com/dp/B007R2JJUG/ 26P 1.27mm flat cable 5ft] or [https://www.amazon.com/dp/B00B2I9JGA/ 10ft]
-====Other Sources====
+([[Model_T_Parallel_Cable:Other_Sources|Other Sources]])
-[https://www.digikey.com/short/pvbjjfjn DigiKey cart with all black parts]
-----
-futurlec.com:
-*[https://www.futurlec.com/ConnIDC.shtml#:~:text=IDCCENTRONICSML IDC Male Centronics Connector] (scroll to bottom)
-*[https://www.futurlec.com/Connectors/IDCC26pr.shtml 26P Female IDC Connector]
-*[https://www.futurlec.com/Cable.shtml#:~:text=GRCABLE26 26P flat cable] (get 2 meters of "26 Core")
-----
-Amazon
-*[https://www.amazon.com/dp/B007R2JJUG/ cable]
-*[https://www.amazon.com/dp/B007R2JEMY/ 26P Female IDC Connector]
-*[https://www.amazon.com/dp/B07ZB6VLWQ/ 36P Male Centronics IDC Connector]
 ===Directions===