Model 200 RAM: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 7: | Line 7: | ||
::(29) round pins | ::(29) round pins | ||
The | The ram in the DigiKey cart above is not yet tested and verified to be a working drop-in replacement for the original specified ram. | ||
This is parts | This is enough parts to build 3 boards, because you can't order less than 3 PCBs from OSHPark anyway. But you only need 1 board total per Model 200. The single new board takes the place of both ram sockets. You can reduce the parts quantities in the DigiKey order. | ||
There will be a few unused pins left over. The order is for 3 sticks of 32 pins each. You will break away and use 14 + 14 + 1 pins from 1 stick for each ram module. | There will be a few unused pins left over. The order is for 3 sticks of 32 pins each. You will break away and use 14 + 14 + 1 pins from 1 stick for each ram module. | ||
Revision as of 18:09, 17 October 2017
- (1) TC551001 128kB SRAM
- (1) 74AHC1G08 AND gate
- (1) 0805 1uF ceramic cap
- (29) round pins
The ram in the DigiKey cart above is not yet tested and verified to be a working drop-in replacement for the original specified ram.
This is enough parts to build 3 boards, because you can't order less than 3 PCBs from OSHPark anyway. But you only need 1 board total per Model 200. The single new board takes the place of both ram sockets. You can reduce the parts quantities in the DigiKey order.
There will be a few unused pins left over. The order is for 3 sticks of 32 pins each. You will break away and use 14 + 14 + 1 pins from 1 stick for each ram module.