Model T Parallel Cable: Difference between revisions

Revision as of 23:33, 25 October 2021

Very simple:
Just place the colored wire on the pin #1 position on both connectors.

This cable is correct for several models of computer:

TRS-80 Model 100

TANDY Model 102, 200, 600

NEC PC-8201, PC-8201A, PC-8300, PC-8401, PC-8500

Olivetti M10

Kyotronic KC-85

@@ Line 3: / Line 3: @@
 [[File:m100_printer_cable_2.jpg|312px]]
-Parts to build a printer cable.
+==To Build a Cable==
+===Parts===
 :[https://www.peconnectors.com/female-idc-sockets-.100-2.54mm/hws1927/ 26pin (2x13) Female IDC with polarity and strain relief]
 <!-- :[https://www.ebay.com/itm/182447194403 26pin (2x13) female IDC with polarity bump and strain relief] -->
@@ Line 9: / Line 11: @@
 <!-- :[https://www.ebay.com/itm/321737466141 36 pin Male Centronics IDC with bail locks] -->
 <!-- :[https://www.futurlec.com/ConnIDC.shtml#:~:text=IDCCENTRONICSML 36 pin Male Centronics IDC with bail locks] (scroll down to '''IDCCENTRONICSML''') -->
-<!-- :[https://www.amazon.com/dp/B00B2I9JGA/ 26 conductor ribbon cable] (10ft) -->
+<!-- : -->
-:[https://www.amazon.com/dp/B007R2JJUG/ 26P 0.05" pitch flat cable]<!-- (5ft) -->
+:[https://www.amazon.com/dp/B007R2JJUG/ 26P 1.27mm flat cable 5ft] (or [https://www.amazon.com/dp/B00B2I9JGA/ 10ft])
-Directons are simple. Just place the colored wire on the pin #1 position on both connectors.
+===Directions===
+Very simple:<br>
+Just place the colored wire on the pin #1 position on both connectors.
+==Compatibility==
 This cable is correct for several models of computer:
 :TRS-80 Model 100