Model T Parallel Cable

From Tandy Tech

Revision as of 11:28, 26 May 2020 by Bkw (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Parts to build a printer cable.

These links will surely expire, but DigiKey doesn't have a good centronics connector to link to.

26pin (2x13) female IDC with polarity bump and strain relief

26 conductor ribbon cable

36 pin male centronics IDC with bail locks

Directons are simple. Just place the colored wire on the pin #1 position on both connectors.

Retrieved from "http://tandy.wiki/index.php?title=Model_T_Parallel_Cable&oldid=1593"