Model T Parallel Cable

From Tandy Tech
Revision as of 18:46, 3 May 2022 by Bkw (talk | contribs) (→‎Parts)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

To Build a Cable

Parts

(Other Sources)

Directions

Very simple:
Just place the colored wire on the pin #1 position on both connectors.

Alternative: Standard parallel printer cable

Remove the nuts from the db25 plug on the motherboard cable, discard the metal bracket, re-install the nuts on the db25 plug.

Compatibility

This cable is correct for several models of computer:

TRS-80 Model 100
TANDY Model 102, 200, 600
NEC PC-8201, PC-8201A, PC-8300, PC-8401, PC-8500
Olivetti M10
Kyotronic KC-85