Model T Serial Cable: Difference between revisions
No edit summary |
No edit summary |
||
| Line 20: | Line 20: | ||
:But the hardware in the M100 *can* actually do RTS/CTS, if you manipulate the UART registers yourself from a machine language program. The only software I know of that does this is HTERM. So these cables are NOT suitable for HTERM | :But the hardware in the M100 *can* actually do RTS/CTS, if you manipulate the UART registers yourself from a machine language program. The only software I know of that does this is HTERM. So these cables are NOT suitable for HTERM | ||
*[https://www.monoprice.com/product?p_id=479 Monoprice 479] | *[https://www.monoprice.com/product?p_id=479 Monoprice 479] | ||
:Shorts RTS/CTS to self-satisfy | :Shorts RTS/CTS to self-satisfy, but curiously, actually passes DTR/DSR correctly | ||
*[https://www.cablewholesale.com/products/serial-modem-cable/null-modem-cables/product-10d1-21303.php CableWholesale 10D1-2103] | *[https://www.cablewholesale.com/products/serial-modem-cable/null-modem-cables/product-10d1-21303.php CableWholesale 10D1-2103] | ||
:Same as Monoprice 479 | :Same as Monoprice 479 | ||
Revision as of 22:23, 28 October 2017
The ideal cable to go from a PC to a Model 100, 102, 200, or 600, is "9F/25M serial null-modem full-handshake".
The serial ports on Models 100-600 are wired DTE, the same as a com port on a PC, but with a female connector, unlike any pc.
This is a backwards configuration from everything else today. There is some suggestion that maybe this is actually the original standard, and IBM came along later and changed it by putting male connectors on their PCs, but in any event, DTE ports being male has been the universal standard now for decades.
- Any modem or printer or digital scale or any other kind of peripheral with a serial connection will be wired DCE with a female connector, usually 25 pin.
- Any serial port card or usb serial adapter for a PC will be wired DTE with a male connector, usually 9 pin.
That means that usually you always need some kind of adapter between a PC and a M100/102/200/600.
The easiest way to connect with parts you are most likely to already have lying around, is to use a 9F/25M Modem Cable combined with a 9M/F Null-Modem Adapter.
Ideal, all-in-one cables:
- C2G 03019 (fake DCD from DSR/DTR, Shield to pin1 on 25M)
- Amphenol CS-DSNL4259MF-005 (fake DCD from DSR/DTR, Shield to pin1 on 25M)
- StarTech SCNM925FM (no DCD, Shield to Shield but not to pin1 on 25M)
Slightly less ideal cables. All-in-one, but not full-handshaking, good for software flow control only:
- These cables work fine for TPDD client/server connection, and almost everything else, since there isn't even any way to *set* hardware flow control in either BASIC or TELCOM anyway.
- But the hardware in the M100 *can* actually do RTS/CTS, if you manipulate the UART registers yourself from a machine language program. The only software I know of that does this is HTERM. So these cables are NOT suitable for HTERM
- Shorts RTS/CTS to self-satisfy, but curiously, actually passes DTR/DSR correctly
- Same as Monoprice 479
- This "HP PLotter" cable is bizarre.
- DCD<-->RTS / DSR+CTS<-->DTS
- WTF??? HP are monsters.
Pending Verification: