NEC:PC-8201A:caps: Difference between revisions

From Tandy Tech
Jump to navigation Jump to search
 
(2 intermediate revisions by the same user not shown)
Line 3: Line 3:
[[File:NEC PC-8201A-mainboard.jpg|thumb]]
[[File:NEC PC-8201A-mainboard.jpg|thumb]]


Capacitor kits for TRS-80 Model 100 are fairly common. All electrolytic caps needed to re-cap a 8201A may be found in any Model 100 cap kit. So the most convenient way to get all needed caps is to just get any Model 100 re-cap kit. There will be several caps left over not used in the 8201A, but none missing for the 8201A.
Capacitor kits for TRS-80 Model 100 are fairly common. All electrolytic caps needed to re-cap an NEC PC-8201A may be found in any Model 100 cap kit. So the most convenient way to get all needed caps is to just get any Model 100 re-cap kit. There will be several caps left over not used in the PC-8201A, but none missing.


Some cap kits for TRS-80 Model 100/102
Similarly, the memory battery is the same in both machines.
 
[https://www.digikey.com/short/77r9nb4w PC-8201A caps from DigiKey] The "customer reference" field shows the board locations.
 
Cap kits for TRS-80 Model 100/102
:[https://console5.com/store/tandy-radio-shack-trs80-model-100-102-cap-kit.html Console5]
:[https://console5.com/store/tandy-radio-shack-trs80-model-100-102-cap-kit.html Console5]
:[https://www.arcadeshopper.com/wp/store/#!/model-100-102-capacitor-kit/p/139509791/category=28313042 ArcadeShopper]
:[https://www.arcadeshopper.com/wp/store/#!/model-100-102-capacitor-kit/p/139509791/category=28313042 ArcadeShopper]
Line 21: Line 25:
| C1 || 3.3u 50v || C78
| C1 || 3.3u 50v || C78
|-
|-
| C2 || 470u 10v || C83
| C2 || 470u 10v, max height 18mm || C83
|-
|-
| C3 || 33u 10v || C85
| C3 || 33u 10v || C85
|-
|-
| C4 || 470u 6.3v, max 10.2mm diameter || C84
| C4 || 470u 6.3v, max width 10mm || C84
|-
|-
| C14 || 100u 6.3v || C86  (10v, ok to substitute)
| C14 || 100u 6.3v || C86  (10v, ok to substitute)

Latest revision as of 09:28, 13 November 2021

NEC PC-8201A Electrolytic Capacitors & Battery

Capacitor kits for TRS-80 Model 100 are fairly common. All electrolytic caps needed to re-cap an NEC PC-8201A may be found in any Model 100 cap kit. So the most convenient way to get all needed caps is to just get any Model 100 re-cap kit. There will be several caps left over not used in the PC-8201A, but none missing.

Similarly, the memory battery is the same in both machines.

PC-8201A caps from DigiKey The "customer reference" field shows the board locations.

Cap kits for TRS-80 Model 100/102

Console5
ArcadeShopper

Battery

ArcadeShopper
Soigeneris
BatteryGuy
... or just search "3/V80H 2P"
PSU Board M100 equiv
C1 3.3u 50v C78
C2 470u 10v, max height 18mm C83
C3 33u 10v C85
C4 470u 6.3v, max width 10mm C84
C14 100u 6.3v C86 (10v, ok to substitute)
C22 0.47u 50v C92
C26 1u 50v C90
Main Board M100 equiv
C46 47u 16v bipolar C75
C47 47u 16v bipolar C76
C48 47u 16v bipolar C77
Memory Battery
BAT1 3/V80H 2P 3-cell 2-pin 3.6v nimh