Disk/Video Interface: Difference between revisions

Latest revision as of 02:14, 19 March 2024

Video

Basic Usage Example

Manuals

Manual

Service Manual

26-3806 Notice

Correction to BASIC Error Codes

Other Books

Inside The TRS-80 Model 100

System Disk

There are 2 versions of the system disk, one for Model 100 (and 102) only, and one for both Model 100 & 200.

Steven Adolph has dissected and copied the system disk files.
System Disk files from Steven Adolf on Club100

The system disk formatting and files are fully described in the service manual.

Arcadeshopper has copies of both versions of the system disk.

26-314 for Model 100

26-3806 for Model 200

Cable

Drives

ROM dumps

File:M40 P.bin is the main rom
File:M17 CG.bin is the character generator
https://drive.google.com/drive/folders/1yqVh_mj5vtBJhYng-Uitvsjnykq0Knnt

Wonderful Hacks from Days Gone By

Use the cassette motor control to use both sides of a double-sided drive!

Search the entire M100SIG archive for anything related to the Disk/Video Interface

https://github.com/LivingM100SIG/Living_M100SIG/search?q=Disk%2FVideo

@@ Line 1: / Line 1: @@
 [[File:m100-dvi-2.jpg]]
 [[File:m100-dvi-1.jpg]]
+==Video==
+[https://youtu.be/Mt6AmyLKkXQ Basic Usage Example]
 ==Manuals==
-[http://www.classiccmp.org/cini/pdf/Tandy/Disk%20Video%20Interface%20Manual.pdf Manual]
+<!-- [http://cini.classiccmp.org/pdf/Tandy/Disk%20Video%20Interface%20Manual.pdf Manual] -->
+[https://archive.org/details/trs-80-model-100-disk-video-interface Manual]
+[http://cini.classiccmp.org/pdf/Tandy/Disk%20Video%20Interface%20Service%20Manual.pdf Service Manual]
+[https://archive.org/details/DVI263806Notice 26-3806 Notice]
+[https://archive.org/details/TRS80DVICorrectionBASICErrorCodes Correction to BASIC Error Codes]
+==Other Books==
+[https://archive.org/details/InsideTheTrs80Model100 Inside The TRS-80 Model 100]
+==System Disk==
+There are 2 versions of the system disk, one for Model 100 (and 102) only, and one for both Model 100 & 200.
+[[File:DVI_system_disk_1.jpg|200px]]
+[[File:DVI_system_disk_2.jpg|200px]]
+Steven Adolph has dissected and copied the system disk files.<br>
+[http://www.club100.org/memfiles/index.php?&direction=0&order=&directory=Steve%20Adolph/DVI%20boot%20disk%20files System Disk files from Steven Adolf on Club100]
+The system disk formatting and files are fully described in the service manual.
-[http://www.classiccmp.org/cini/pdf/Tandy/Disk%20Video%20Interface%20Service%20Manual.pdf Service Manual]
+Arcadeshopper has copies of both versions of the system disk.
-==Boot Disk==
+[https://www.arcadeshopper.com/wp/?page_id=11#!/Disk-Video-Interface-system-disk-26-314-Model-100-102/p/141587103/category=28313042 26-314 for Model 100]
-[http://www.club100.org/memfiles/index.php?&direction=0&order=&directory=Steve%20Adolph/DVI%20boot%20disk%20files]
+[https://www.arcadeshopper.com/wp/?page_id=11#!/Disk-Video-Interface-system-disk-26-3806-Model-200/p/143281618/category=28313042 26-3806 for Model 200]
 ==Cable==
-===For Model 100 or 200===
+[[Disk/Video Interface: Cable|Cable]]
-(This is still pending verification)
-Parts:
-* 40pin DIP idc connector
-:http://www.king-cart.com/cgi-bin/cart.cgi?store=phoenixent&product_name=HWS15322
-* 40pin female idc connector, with polarity notch and strain-relief
-:http://www.king-cart.com/phoenixent/product_name=HWS1877
-* 40pin ribbon cable, 20 inches
-Assembly:
+==Drives==
-* Crimp the cable in the dip connector such that if you are looking at the dip connector with the #1 pin top-left and pins pointing away from you, the cable exits to the right, red stripe on top.
+[[Disk/Video Interface: Drives|Drives]]
-* Arrange the cable on the 40 pin female idc connector such that the red stripe goes to the pin one marker, and the cut end of the cable ends on the side of the connector with the polarity notch, and the cable extends away from the connector on the side opposite the polarity notch. Crimp the cable. Then fold the cable back over the top to snap on the strain relief clip. Now the cable is going the same direction as the key notch.
-===For Model 102===
+==ROM dumps==
-Parts:
+[[File:M40_P.bin]] is the main rom<br>
-* 40pin male idc connector, with polarity notch
+[[File:M17 CG.bin]] is the character generator<br>
-* 40pin female idc connector, with polarity notch and strain-relief
+https://drive.google.com/drive/folders/1yqVh_mj5vtBJhYng-Uitvsjnykq0Knnt
-:http://www.king-cart.com/phoenixent/product_name=HWS1877
-* 40pin ribbon cable, 20 inches
-Assembly:
+==Wonderful Hacks from Days Gone By==
-* Crimp the male connector to one end of the cable with the cut end of the cable ending on the key-notched side of the connactor, and the red stripe toward the pin 1 marker. The cable extends away from the connector on the side opposite the key notch.
+[https://raw.githubusercontent.com/LivingM100SIG/Living_M100SIG/main/M100SIG/Lib-09-PERIFERALS/DVI2ND.INF Use the cassette motor control to use both sides of a double-sided drive!]
-* Arrange the other end of the cable and female connector the same as above, except also:
-** Peel the conductors apart into 20 pairs, one inch long.
-** Flip each pair over before putting onto the connector.
-Finished example:
+==Search the entire M100SIG archive for anything related to the Disk/Video Interface==
-:These pics are from an ebay ad.
+https://github.com/LivingM100SIG/Living_M100SIG/search?q=Disk%2FVideo
-:You probably want to make the cable longer than this.
-:Or, maybe make it even shorter than this and use just use it as an adapter, and use plain generic PATA/IDE/Arduino/raspberry-pi extension cables for whatever length you want.
-:[[file:t102-dvi-cable-1.jpg|200px]][[file:t102-dvi-cable-2.jpg|200px]]