Teeprom: Difference between revisions

From Tandy Tech
Jump to navigation Jump to search
Line 29: Line 29:
== Sources ==
== Sources ==
The PCB is maintained on github!: http://github.com/bkw777/Teeprom<br>
The PCB is maintained on github!: http://github.com/bkw777/Teeprom<br>
The carrier is maintained on github!: http://github.com/aljex/pcb2molex8878
The carrier is maintained on github!: http://github.com/bkw777/pcb2molex8878

Revision as of 00:10, 2 October 2019

More Pics

Parts

PCB: https://oshpark.com/shared_projects/khQUX7cs
BOM: https://www.digikey.com/short/pbch8c
Carrier: http://shpws.me/RqW3

Programming

To write the eeprom, you need:

Put the female ends of the wires onto the test clip.
Put the male ends of the wires into the dip28 socket.
Put the dip28 socket into the programmer.
Remove the Teeprom from the Model 100/102/200
Clip the test clip onto the chip on the Teeprom module.

Sources

The PCB is maintained on github!: http://github.com/bkw777/Teeprom
The carrier is maintained on github!: http://github.com/bkw777/pcb2molex8878