Teeprom: Difference between revisions
Jump to navigation
Jump to search
| Line 19: | Line 19: | ||
To write the eeprom, you need: | To write the eeprom, you need: | ||
* Programmer such as [http://autoelectric.cn/EN/TL866_main.html TL866] | * Programmer such as [http://autoelectric.cn/EN/TL866_main.html TL866] | ||
* SOIC-28 test clip such as [https://duckduckgo.com/?q=pomona+5437&ia=web Pomona 5437] | * SOIC-28 test clip such as [https://duckduckgo.com/?q=pomona+5437&ia=web Pomona 5437], [https://duckduckgo.com/?q="923660-28" AP/3M 923660-28], [https://duckduckgo.com/?q="923660-28" AP/3M 923665-28] | ||
* [https://www.digikey.com/product-detail/en/adam-tech/ICS-328-T/2057-ICS-328-T-ND/9832859 dip-28 socket] | * [https://www.digikey.com/product-detail/en/adam-tech/ICS-328-T/2057-ICS-328-T-ND/9832859 dip-28 socket] | ||
* 28 [https://www.amazon.com/dp/B06XRV92ZB/ jumper wires] with male pins on one end and female Dupont style sockets on the other end. | * 28 [https://www.amazon.com/dp/B06XRV92ZB/ jumper wires] with male pins on one end and female Dupont style sockets on the other end. | ||
Revision as of 21:13, 8 March 2020
Parts
PCB: https://oshpark.com/shared_projects/EajwlGGE
BOM: https://www.digikey.com/short/pbch8c
Carrier: Shapeways or Sculpteo
Programming
To write the eeprom, you need:
- Programmer such as TL866
- SOIC-28 test clip such as Pomona 5437, AP/3M 923660-28, AP/3M 923665-28
- dip-28 socket
- 28 jumper wires with male pins on one end and female Dupont style sockets on the other end.
- rom image files
Put the female ends of the wires onto the test clip.
Put the male ends of the wires into the dip28 socket.
Put the dip28 socket into the programmer.
Remove the Teeprom from the Model 100/102/200
Clip the test clip onto the chip on the Teeprom module.
Sources
The PCB is maintained on github: http://github.com/bkw777/Teeprom
The carrier is maintained on github: http://github.com/bkw777/pcb2molex8878