TPDD client

A "TPDD client", also usually called a DOS(note), is software that runs on the portable and can read and write files on a Tandy Portable Disk Drive or Tandy Portable Disk Drive 2, or any of their rebadged versions like Brother FB-100 and Purple Computing disk drive, or any "TPDD server", software which runs on a pc and emulates a TPDD.

To use a real TPDD or TPDD2, you need the special cable that came with the drive, or a new cable that has the same electronics inside.

TPDD#Cable

https://github.com/bkw777/TPDD_Cable

https://www.arcadeshopper.com/wp/?page_id=11#!/Special-serial-cable-for-Tandy-Portable-Disk-Drive-and-Tandy-Portable-Disk-Drive-2/p/144969001/category=28313042

To use a TPDD server aka emulator, you need a normal Model_T_Serial_Cable.

Here are some of the major DOS's for Model T computers:

• floppy - The official DOS that came with the TPDD
• flopy2 - The official DOS that came with the TPDD2
• TS-DOS - Commercial DOS from Travelling Software. Now free.
• Tiny - A tiny DOS
• Teeny - An even smaller version of Tiny, and the smallest DOS
• DSKMGR - An early alternative DOS. One of the only things available for Kyotronic KC-85 and Olivetti M-10.
• POWR-DOS / POWR-DISK - An early DOS from Acroatix.
• Disk+ - Commercial DOS option ROM from PCSG.
• Disk Power - Commercial DOS by Hugo Ferreyra.

Note, the term DOS does not mean MS-DOS in this context, but the generic term for any disk operating system.

Here are some TPDD clients that run on other systems:

• TpddTool.py - Python. Runs on anything that has a Python interpreter and the PySerial module.
• PDD210 - MS-DOS client by Tim Palmquist

• File:Pdd2.zip

  pdd2.zip

  - MS-DOS TPDD2 client by Brian Woodcox

• File:Pdd1.zip

  pdd1.zip

  - MS-DOS TPDD1 client by BJ Gleason - modified from PDD2
• LapDOS - MS-DOS client by Travelling Software
• MacDOS - Macintosh client (128,512,Plus,SE, etc...) by Travelling Software
• DISKMGR - Cambridge Z88
• DISC-RPB - Cambridge Z88
• MacTrans - TPDD client implemented as as Macintosh HyperCard stack ??? (dead link)

---

To run MS-DOS apps on Linux with DOS's COM1 connected to Linux's /dev/ttyUSB0, and DOS's C: drive mounted on the current directory:

 dosbox -c "serial1 directserial realport:ttyUSB0" .

Example:

 wget https://archive.org/download/M100SIG/M100SIG.zip/Lib-09-PERIFERALS%2FPDD210.ZIP
 unzip PDD210.ZIP
 dosbox -c "serial1 directserial realport:ttyUSB0" .
 C:>pdd