WP-2: Difference between revisions
| Line 20: | Line 20: | ||
==Expansion Card== | ==Expansion Card== | ||
http://randomvariations.com/wp-content/uploads/2014/09/IMG_8920_wp2_zork1.jpg<br> | http://randomvariations.com/wp-content/uploads/2014/09/IMG_8920_wp2_zork1.jpg<br> | ||
Toshiba Memory Card | Toshiba Memory Card / IC Card<br> | ||
32K, 64K, or 128K RAM card<br> | 32K, 64K, or 128K RAM card<br> | ||
32K, 64K, 128K, or 256K ROM card<br> | 32K, 64K, 128K, or 256K ROM card<br> | ||
Connector that fits the Expansion port: | Connector that fits the Expansion port:<br> | ||
:38 pins, single row, 1.27mm | :Similar to PC-Card/Cardbus/PCMCIA, but thinner with a single row of pins instead of two rows of pins. | ||
:38 pins, single row, 1.27mm pitch | |||
:Card main body 2.5mm thick x 53mm wide not including polarity ridge on one side | :Card main body 2.5mm thick x 53mm wide not including polarity ridge on one side | ||
:[[File:JC20-B38S-F1.pdf]] | :[[File:JC20-B38S-F1.pdf]] | ||
:JAE JC20-B38S-F1-A1 0.29mm-0.45mm pcb, | :JAE JC20-B38S-F1-A1 0.29mm-0.45mm pcb, centered, https://www.asapaog.com/rfq/japan-aviation-electronics/jc20-b38s-f1-a1/ | ||
:JAE JC20-B38S-F2-A1 0.5mm pcb, offset | :JAE JC20-B38S-F2-A1 0.5mm pcb, offset | ||
:JAE JC20-B38S-F3-A1 0.2mm pcb, offset | :JAE JC20-B38S-F3-A1 0.2mm pcb, offset | ||
Revision as of 12:39, 21 September 2020
Manuals
https://archive.org/search.php?query=Tandy%20WP-2
RAM
Internal ram upgrade socket can take either a 32K or a 128K chip.
- 32Kx8 parallel SRAM, 5v, low power, DIP-28
- 128Kx8 parallel SRAM, 5v, low power, DIP-32
- Hitachi HM628128LP
- ISSI IS62C1024L
- Alliance AS6C1008
Chips that would work with a simple SOIC-DIP or TSOP-DIP adapter pcb:
- Cypress CY62128E
If you want to get real crazy, this probably works, although may not fit
Expansion Card
http://randomvariations.com/wp-content/uploads/2014/09/IMG_8920_wp2_zork1.jpg
Toshiba Memory Card / IC Card
32K, 64K, or 128K RAM card
32K, 64K, 128K, or 256K ROM card
Connector that fits the Expansion port:
- Similar to PC-Card/Cardbus/PCMCIA, but thinner with a single row of pins instead of two rows of pins.
- 38 pins, single row, 1.27mm pitch
- Card main body 2.5mm thick x 53mm wide not including polarity ridge on one side
- File:JC20-B38S-F1.pdf
- JAE JC20-B38S-F1-A1 0.29mm-0.45mm pcb, centered, https://www.asapaog.com/rfq/japan-aviation-electronics/jc20-b38s-f1-a1/
- JAE JC20-B38S-F2-A1 0.5mm pcb, offset
- JAE JC20-B38S-F3-A1 0.2mm pcb, offset
0.4mm pcbs would fit the F1 version of the connector.
The pcb fits in the center of the thickness on the F1 connector, which leaves 1mm of height for components on both top & bottom of the pcb.
TSOP parts are 1mm tall and should fit with no special tricks.
SOIC parts could be mounted upside down in a hole.
Memory Battery
Binary Apps
CamelForth FORTH Interpreter ZXZVM Infocom Z-Machine Interpreter