WP-2: Difference between revisions

From Tandy Tech
Jump to navigation Jump to search
Line 31: Line 31:
:Similar to PC-Card/Cardbus/PCMCIA, but thinner with a single row of pins instead of two rows of pins.
:Similar to PC-Card/Cardbus/PCMCIA, but thinner with a single row of pins instead of two rows of pins.
:38 pins, single row, 1.27mm pitch
:38 pins, single row, 1.27mm pitch
:Card main body 2.5mm thick x 53mm wide not including polarity ridge on one side
:Card main body 3.2mm thick x 54mm wide
:[[File:JC20-B38S-F1.pdf]]
:[[File:JC20-B38S-F1.pdf]]


:JAE JC20-B38S-F1-A1  0.29mm-0.45mm pcb, centered,  https://www.asapaog.com/rfq/japan-aviation-electronics/jc20-b38s-f1-a1/
:JAE JC20-B38S-F1-A1  0.29mm-0.45mm pcb, centered,  https://www.asapaog.com/rfq/japan-aviation-electronics/jc20-b38s-f1-a1/
:JAE JC20-B38S-F2-A1  0.5mm pcb, offset
:JAE JC20-B38S-F2-A1  0.5mm pcb, offset
:JAE JC20-B38S-F3-A1  0.2mm pcb, offset
:JAE JC20-B38S-F3-A1  0.2mm pcb, offset
0.4mm pcbs would fit the F1 version of the connector.<br>
The pcb fits in the center of the thickness on the F1 connector, which leaves 1mm of height for components on both top & bottom of the pcb.<br>
TSOP parts are 1mm tall and should fit with no special tricks.<br>
SOIC parts could be mounted upside down in a hole.


==Memory Battery==
==Memory Battery==

Revision as of 20:55, 30 September 2020

Manuals

https://archive.org/search.php?query=Tandy%20WP-2

RAM

Internal ram upgrade socket can take either a 32K or a 128K chip.

  • 32Kx8 parallel SRAM, 5v, low power, DIP-28
  • 128Kx8 parallel SRAM, 5v, low power, DIP-32
Hitachi HM628128LP
ISSI IS62C1024L
Alliance AS6C1008

Chips that would work with a simple SOIC-DIP or TSOP-DIP adapter pcb:

Cypress CY62128E

If you want to get real crazy, this probably works, although may not fit

https://www.digikey.com/product-detail/en/DS1245AB-85/DS1245AB-85-ND/

Expansion Card

DIY

https://github.com/bke777/WP-2_IC_Card

References / notes

http://randomvariations.com/wp-content/uploads/2014/09/IMG_8920_wp2_zork1.jpg
Toshiba Memory Card / IC Card
32K, 64K, or 128K RAM card
32K, 64K, 128K, or 256K ROM card

Connector that fits the Expansion port:

Similar to PC-Card/Cardbus/PCMCIA, but thinner with a single row of pins instead of two rows of pins.
38 pins, single row, 1.27mm pitch
Card main body 3.2mm thick x 54mm wide
File:JC20-B38S-F1.pdf
JAE JC20-B38S-F1-A1 0.29mm-0.45mm pcb, centered, https://www.asapaog.com/rfq/japan-aviation-electronics/jc20-b38s-f1-a1/
JAE JC20-B38S-F2-A1 0.5mm pcb, offset
JAE JC20-B38S-F3-A1 0.2mm pcb, offset

Memory Battery

CR2430

Binary Apps

CamelForth FORTH Interpreter
ZXZVM Infocom Z-Machine Interpreter

Retrieved from "http://tandy.wiki/index.php?title=WP-2&oldid=1749"