Teeprom: Difference between revisions

From Tandy Tech
Jump to navigation Jump to search
Line 16: Line 16:
To write the eeprom, you need:
To write the eeprom, you need:
* Programmer such as [http://autoelectric.cn/EN/TL866_main.html TL866]
* Programmer such as [http://autoelectric.cn/EN/TL866_main.html TL866]
* SOIC-28 test clip such as [https://duckduckgo.com/?q=pomona+5437&ia=web Pomona 5437] or [https://duckduckgo.com/?q=&quote923660-28&quote AP or 3M 923660-28]
* SOIC-28 test clip such as [https://duckduckgo.com/?q=pomona+5437&ia=web Pomona 5437] or [https://duckduckgo.com/?q="923660-28" AP or 3M 923660-28]
* [https://www.digikey.com/product-detail/en/adam-tech/ICS-328-T/2057-ICS-328-T-ND/9832859 dip-28 socket]
* [https://www.digikey.com/product-detail/en/adam-tech/ICS-328-T/2057-ICS-328-T-ND/9832859 dip-28 socket]
* 28 [https://www.amazon.com/dp/B06XRV92ZB/ jumper wires] with male pins on one end and female Dupont style sockets on the other end.
* 28 [https://www.amazon.com/dp/B06XRV92ZB/ jumper wires] with male pins on one end and female Dupont style sockets on the other end.

Revision as of 17:00, 3 November 2019

More Pics

Parts

PCB: https://oshpark.com/shared_projects/khQUX7cs
BOM: https://www.digikey.com/short/pbch8c
Carrier: http://shpws.me/RqW3

Programming

To write the eeprom, you need:

Put the female ends of the wires onto the test clip.
Put the male ends of the wires into the dip28 socket.
Put the dip28 socket into the programmer.
Remove the Teeprom from the Model 100/102/200
Clip the test clip onto the chip on the Teeprom module.

Sources

The PCB is maintained on github!: http://github.com/bkw777/Teeprom
The carrier is maintained on github!: http://github.com/bkw777/pcb2molex8878