Teeprom: Difference between revisions

From Tandy Tech
Jump to navigation Jump to search
No edit summary
Line 14: Line 14:
PCB: https://oshpark.com/shared_projects/khQUX7cs<br><!-- https://oshpark.com/shared_projects/XkHpiF2z-->
PCB: https://oshpark.com/shared_projects/khQUX7cs<br><!-- https://oshpark.com/shared_projects/XkHpiF2z-->
BOM: https://www.digikey.com/short/pbch8c<br>
BOM: https://www.digikey.com/short/pbch8c<br>
Carrier: http://shpws.me/RqW3<!-- http://shpws.me/RngB -->
Carrier: [http://shpws.me/RqW3 Shapeways] or [https://www.sculpteo.com/en/print/pcb2molex8878_2_chamfer/TZR7NMQ4 Sculpteo]


== Programming ==
== Programming ==

Revision as of 21:13, 20 November 2019

More Pics
(Pictures with the pin & hole in one corner are an older version. Pictures with a chamfer in one corner are the current version.)

Parts

PCB: https://oshpark.com/shared_projects/khQUX7cs
BOM: https://www.digikey.com/short/pbch8c
Carrier: Shapeways or Sculpteo

Programming

To write the eeprom, you need:

Put the female ends of the wires onto the test clip.
Put the male ends of the wires into the dip28 socket.
Put the dip28 socket into the programmer.
Remove the Teeprom from the Model 100/102/200
Clip the test clip onto the chip on the Teeprom module.

Sources

The PCB is maintained on github!: http://github.com/bkw777/Teeprom
The carrier is maintained on github!: http://github.com/bkw777/pcb2molex8878