Teeprom: Difference between revisions

From Tandy Tech
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:


PCB: https://oshpark.com/shared_projects/XkHpiF2z
PCB: https://oshpark.com/shared_projects/XkHpiF2z<br>
BOM: https://www.digikey.com/short/pbch8c
BOM: https://www.digikey.com/short/pbch8c<br>
Sled: http://www.thingiverse.com/thing:3723135 or http://shpws.me/Rm6Y
Sled: http://www.thingiverse.com/thing:3723135 or http://shpws.me/Rm6Y



Revision as of 08:07, 20 July 2019

PCB: https://oshpark.com/shared_projects/XkHpiF2z
BOM: https://www.digikey.com/short/pbch8c
Sled: http://www.thingiverse.com/thing:3723135 or http://shpws.me/Rm6Y

To write the eeprom, you need:

Put the male ends of the wires into the dip28 socket.
Put the female ends of the wires onto the test clip.
Put the dip28 socket into the zif socket on the programmer.
Remove the Teeprom from the Model 100/102/200
Clip the test clip onto the chip on the Teeprom module.

Similar to FigTronix#Model_100/102/200_Option_ROM_adapter_(SOIC_28C256), but without the write-enable jumper and special programming adapter.