PG Designs M100 RAM Expansion

From Tandy Tech
Jump to navigation Jump to search

Intro

PG Designs made several ram expansion boards for Model 100 that ranged from 32K to 224K.
These devices added extra ram to a Model 100 in the form of 32K "banks", where each bank was essentially a whole separate computer. You use the extra ram by switching from one bank to another, and while in one bank you generally only have access to the files in that bank. It's almost as if you put one Model 100 away and pulled out a different one. The PG Designs ram adds to the original ram inside the Model 100, so if you have 32K installed in the Model 100, and add the the 224K PG Designs, you have a total of 256K available, in the form of 8 banks, where your original normal built-in ram is bank #1.

Files

https://drive.google.com/open?id=0Bys6eLbSbYyhTTdmeGc0b2trODg

Installing the bank-switch utility

  1. Back up any files you care about currently on the M100.
  2. Hard reset the M100 (wipe the ram): CTRL+BREAK+RESET
  3. Use Teeny (or any TPDD client) and dlplus (or any TPDD server) to copy "MENU.BA" to the M100.
    (There are other ways you could transfer this file, but what you can NOT do is transfer MENU.BA the usual way directly with TELCOM, or even with LOAD "COM:...", like you could with any other .BA file. The file is a .BA basic program, but it contains machine language data that breaks normal serial transfer. It must be treated like a binary file to get it installed, and then executed.)
  4. Run MENU.BA
    You will answer some questions.
    You will see "saving and moving program".
    Ignore the “FC error in 4” error.
    It will then delete the first 5 lines of itself and re-run itself.
    The program is now in lowmem.
    It will also remove the next 5 lines of itself.

At this point the program IS installed, though you can't see it.
It is an invisible program called 0MENU. (number zero, not letter oh)

To activate, blindly type 0MENU at the main menu and hit Enter.

You should now see a new menu, and you can switch to another bank.

0MENU is only installed in bank 1 at this point.

When you switch to another bank, 0MENU won’t exist there at first, and so you can't use it to switch back.

You can get back to bank 1, or any other bank, one of two ways:

  • One way is you can just power off and back on, which puts you back in bank 1. And since bank 1 has 0MENU installed, you can use it go from there to any other.
  • Another way is to repeat the 0MENU install procedure in every bank, so you have 0MENU in every bank.

Usage

0MENU also allows you to copy files from any bank that has 0MENU to any other bank that has 0MENU.

You can use INVISO.BA to make the program visible (MENU.BA), or invisible again (0MENU).

TODO

Find or create an mp3 cassette version of 0menu.

Create a 0menu injector similar to the teeny or floppy installers?

Credits / References

Thanks to Stephen Adolph for documenting the install and usage procedures and providing a pdf scan of the manual to an early 32k (single bank) model.

Pictures: https://photos.app.goo.gl/HgBp1QsyNhM4JUg78

M100SIG.ZIP: https://archive.org/details/M100SIG

There are several bits of info about the PG Designs ram expansion all through different places in this archive. Here are some examples, but look through the whole thing yourself:
Lib-09-PERIFERALS/BANKSW.100
Lib-09-PERIFERALS/PG-TIP.000
Lib-09-PERIFERALS/PG-TIP.001
Lib-09-PERIFERALS/PG-TIP.002
Lib-09-PERIFERALS/PG64K.DVI
Lib-09-PERIFERALS/PGMENU.100
Lib-09-PERIFERALS/PGMUNK.TIP
Lib-09-PERIFERALS/RAMEXP.THD
Lib-09-PERIFERALS/DSKMGR.PGD
LIB-13-REVIEWS/BIGRAM.THD
LIB-13-REVIEWS/BIGRAM.REV
LIB-13-REVIEWS/PGD64K.REV

http://www.tmne.com/downloads.html (see floppyco.txt from the menu_ba.zip here)

http://www.club100.org/memfiles/index.php?direction=0&order=&directory=Steve%20Adolph/MENU%20add%20on%20for%20M100%20and%20T102& 0menu v1.3

https://drive.google.com/open?id=0Bys6eLbSbYyhZTY1a3VXVFRUQmM 0menu v2.01 (from Richard Hanson below)

http://www.club100.org/library/libups.html See the RICHARD HANSON section

PG Design Data Transfer Utility v2.01 for 32K - 224K RAM Expansion units.
Please note: The MENU.BA file is not in ASCII due to embeded machine language code. You must download with xmodem or greater. The INVISO.BA file is ASCII.
MENU.BA
INVISO.BA

Apparently these were also sold under the name Enterprise Systems? Maybe re-seller? https://drive.google.com/open?id=1pJcSvFAw4smcPIzbVWhnBLERoaKb3xqX

Compatibility issue, and work-around, with the stock Tandy dos for TPDD and TPDD-2: http://www.ordersomewherechaos.com/rosso/fetish/m102/web100/docs/pdd2-dos-patch.html